Posted by: therob
k &n filter - 15/09/02 11:20 AM
I just installed a new K&N filter, but the filter box doesnt close all the way, I can only clamp 2 of the clamps, does anyone have the same problem?
Posted by: XOC
Re: k &n filter - 15/09/02 11:36 AM
It's not the right filter, or it's not installed correctly.
Don't drive it until you get all the clamps closed.
Posted by: JtaoJ
Re: k &n filter - 15/09/02 11:43 AM
you should be able to compare it to your old filter on the measurements (L/W) to see if it is the correct size. The depth as I recall is a bit different, but not so much that it wouldn't allow the filter box to close.
XOC is correct...don't drive until you get this resolved...unless you want a grasshopper or worse sucked into your combustion chamber. Good luck.
Posted by: UTJMAC
Re: k &n filter - 15/09/02 12:05 PM
Make sure you DO NOT use the extra rubber gasket that comes with the filter. Other wise, it should fit a little more snug than the original, but should close fine. Make sure you have the filter centered in the airbox as well.
John
Posted by: rednec
Re: k &n filter - 15/09/02 04:01 PM
I've noticed on my truck that it seems easier to fit the filter into the top half of the airbox and then close it. Everything lines up perfectly when I do it that way.
Posted by: therob
Re: k &n filter - 15/09/02 06:09 PM
Well I went to talk to the guy at the parts store, he pointed out that the instructions say (on the last line in small print) that is will only close with 2 clips. I checked the part number both at the store and on the web site, I guess ill trim it if i want all the clips to close, whice to me is the best thing. Or I might just return it and spend the extra cash on a new intake kit, you know the one that replaces the oem box. Thanks for your help.
Rob
Posted by: UTJMAC
Re: k &n filter - 15/09/02 07:29 PM
I don't know why yours would only close with 2 clips, or why it would be written on the instructions. Do you have a 4 cyl?
Posted by: J.P.
Re: k &n filter - 15/09/02 08:14 PM
I had the same problem with my Xterra. It just took some extra effort, but all of the air box clips latched properly.
Posted by: Sean
Re: k &n filter - 16/09/02 10:23 AM
The K&N filter gasket is a little thicker/harder than the stock filter gasket, hence the very snug fit. But once you do get it in there, it fits fine. I did have a problem with the lowest clip popping off, so I filed a very small "V" grove on the part where the clip touches the top portion of the air box, and I've never had a problem since.
Posted by: OffroadX
Re: k &n filter - 16/09/02 10:34 AM
All 4 of mine close with only a little extra effort.
BTW, the extra rubber pieces only come with one of the two variations of the part number. The -1 suffix doesn't have them, the -2 suffix does, or vice-versa. Same filter otherwise, one just comes with the extra bits to fit a different style airbox.
Brent