Posted by: CosmicX
elocker rehash - 29/01/04 10:03 AM
I searched quite a bit, but info on the elockers was old. Maybe I missed the defining "yes" or "no" answer somewhere.
Any news if eaton will ever bring them out for the X? The only apps I see on their site is for Fords and GM's.
Posted by: OnlyOneDR
Re: elocker rehash - 29/01/04 10:39 AM
Last word I had direct from the Eaton Torque Control Products Division was a Spring '05 release, but I have not conversed with them in over a year.
Posted by: CosmicX
Re: elocker rehash - 29/01/04 11:04 AM
Wow, spring 05? Long time since their scheduled 02 release. The X will be a new model by then. :rolleyes:
Thanks for the info!
Posted by: Anonymous
Re: elocker rehash - 29/01/04 12:02 PM
Just a thought - any chance the locker in the new Xterra/Fronty will be compatable w/ the current axle? I suppose the rear axle will probably be different on the new one...
Posted by: OffroadX
Re: elocker rehash - 29/01/04 01:04 PM
Don't know the spec on the 05 rear axle yet, but my gut tells me the H233b won't be it. Looking at a couple of photos of the 05 Frontier, the silhouette of the rear diff does not look like the H233b to me, the drain plug is either not visible or looks to be centered. The H233b plug is pretty obvious and on the right side.
Brent
Posted by: XOC
Re: elocker rehash - 29/01/04 01:10 PM
Front and rear diffs should be Dana 44s on the next Xterra. Then it won't matter about Eaton because there will be plenty of options.
Posted by: ChuckH
Re: elocker rehash - 29/01/04 01:22 PM
I don't think we'll ever see an Eaton locker. Eaton developed one for Nissan, but Nissan told them to take a hike and went with a Japanese company for the factory units that are coming. I think Eaton pretty much said "screw it" and dropped the program after that. That's what one of the guys from Nissan told me last summer anyway. Rather disappointing to say the least.
Posted by: OnlyOneDR
Re: elocker rehash - 29/01/04 04:43 PM
I will see what's new that I can find out. I work for Eaton (albeit a different division).
Posted by: Anonymous
Re: elocker rehash - 29/01/04 05:05 PM
Here is what they told me..
Chris:
We do not currently have any firm plans for manufacturing the Eaton
ELocker(TM) differential for Nissan axles.
Regards,
Jeff Phillips
Eaton Automotive
-----Original Message-----
From: Traction.eaton.com@smtpgw3.etn.com
[mailto:Traction.eaton.com@smtpgw3.etn.com]
Sent: Wednesday, January 07, 2004 5:23 PM
To: Phillips, Jeff L
Subject: Torque Control Feedback E-mail
request-type:
normal
to-email:
EatonTraction@Eaton.com
subject:
Torque Control Feedback E-mail
require:name:
company:
title:
require:from-email:
comments:
When do you plan on having e-lockers available for Nissan Xterras?
mailing address:
phone:
physical address:
fax:
submit:
Submit