Stock, just trimming, and I finally got around to adding a few turns on the torsion bars but I'm not nearly as cranked as most of the others I've seen. I got a little rubbing in the inside top up front on some urban features before I cranked (namely crossing the dip at the entrance to my parking lot at an angle) and a rub now and then off-road. No problem since I finally added a couple inches between the top of the tire and the fender lip.
It's still possible you'll get rubbing on the fuel line cover in the RR well, but it's not actually harming anything other than the plastic cover. I think it's more a function of width than diameter though. I switched to 25mm offset Pathfinder wheels which pushed the tires .6" further out and haven't touched it since (though I now rub the fender lip). The 265mm wide tires you're looking at are 10.46" wide, should clear the cover I'd say.

Brent

[ 02-04-2002: Message edited by: OffroadX ]