Question for those that have replaced lower ball joints

You are not logged in. [Log In] Xterra Owners Club » Forums » The Xterra » Suspension » Question for those that have replaced lower ball joints

Newest Members

0 registered (), 64 Guests and 0 Spiders online.

Key: Admin, Global Mod, Mod

Topic Options

Rate This Topic

#680046 - 05/05/13 08:06 AM Question for those that have replaced lower ball joints
slantyshanty Member Registered: 24/06/09 Posts: 283 Loc: Northern Michigan	Did mine thus weekend with Moog. Curious how far the SHOULD stick out, on top with the nut. I tightened them until they were pretty much flush with the top of the nut and I couldn't turn it any more. But feeling underneath the LCA, there is still some space and I can't remember if there was a lip or something to stop it at a certain point. _________________________ 2004 World Champ - 4x4 Man Trans - Silver - 3"SL+2"BL - Revolvers - Rancho RS9000XL's - Rancho RS5000 stab w/IAB - ARB rear locker - 34" BFG MT's Soft 8's - Blood red Shrock Sliders - Mean Green 180A - Optima 31 Bluetop - U-bolt skids - Hz+dB's
Top

#680050 - 08/05/13 05:00 PM Re: Question for those that have replaced lower ball joints [Re: slantyshanty]
TJ Member Registered: 08/03/01 Posts: 7756 Loc: Lawrenceville, NJ, USA	I don't have it in front of me, but I THINK it was flush. The exact length of the new ball joint of course could change that position...but I think I also used Moogs. Hopefully you didn't seat it with a burr or a spec of detritus keeping it from going all the way down, etc. _________________________ - TJ 2001 Xterra '03 VG33, SE 5 spd, 305/70/16's, Revolvers, UBSkidderz, Doubled AAL's, 3"SL/2"BL, winch/bumpers, skids, sliders, OBA, Snorkel, pine stripes.... Friends don't let friends drive stock. http://www.gifsoup.com/view/501230/tj-tackling-crawlers-ridge-o.gif
Top

Moderator: SvenDog