parts and lift question

Posted by: Anonymous

parts and lift question - 09/06/07 07:01 PM

if i but calmini 3" arms up front and shacles in the back
wont i be short in the rear
Posted by: Anonymous

Re: parts and lift question - 10/06/07 11:33 AM

Yes, the shackles are good for about 1.5" of lift depending on which ones you get.
Posted by: ripcurl2151

Re: parts and lift question - 11/06/07 05:03 PM

you need to buy add-a-leafs too for the rear. costs about $150.
Posted by: Rickster43

Re: parts and lift question - 11/06/07 07:24 PM

Quote:
Originally posted by kobo:
...wont i be short in the rear..
It's better to be short in the rear, Than short in the Front... [LOL]
Posted by: Anonymous

Re: parts and lift question - 11/06/07 08:54 PM

Quote:
Originally posted by kobo:
if i but calmini 3" arms up front and shacles in the back
wont i be short in the rear
Only if you crank the torsion bars to bring the front end up.
Posted by: xterra3202

Re: parts and lift question - 14/06/07 08:01 AM

The UCA's only bring the front suspension geometry back into check after you lift the truck by cranking the T-bars like Eric was saying and allowing you to re-align the front end. If you put on the UCA's without cranking the T-bars you will have no lift and the suspension geometry will be off until you crank em up.

Tim
Posted by: Anonymous

Re: parts and lift question - 14/06/07 06:01 PM

so...
i can put these on and lift the front level with the shackles lift and i would b ok after alignment until i can get the extra leaf lift