Posted by: Carlton McMillan
Replaced the Starter this weekend.. - 28/10/02 06:03 AM
The bendix (gear that engages the flywheel) was sticking sometimes causing it to drag after the engine started.
Start to finish was about an hour.
For a 2WD it would be a rather easy swap. However for those of us with 4WD it is a bit more difficult due to the front driveline (tight to get the starter in and out)
Start to finish was about an hour.
For a 2WD it would be a rather easy swap. However for those of us with 4WD it is a bit more difficult due to the front driveline (tight to get the starter in and out)