Noobie here... Need some advise on replacing bilsteins on 2nd gen (2006)

Off Road. Been calling around to dealers and others about getting these replaced and so far the prices are outrageous. Is this a real problem to perform this task. Pretty sure I've got the tools to do this and a garage to do it in. Just wondering if any of you DIYourselfers have tackled this and what are some of the pitfalls to look for... I know the rears are pretty straight forward but the fronts look like work. Anyone done this themselves? Appreciate any help/advise, Thanks, Chris

The rear shocks are realativly easy, the fronts are a different story.

The sront shocks are a coil over type shock, you'll need a spring compressor to do those.

If you have not done coil over type shocks or struts I would not recommend a trial by fire, a wrong move could cost you your life or some other body part if the spring tension is accidently released during assembly or disassembly.