I have a 4" hole saw...but I do not have the bit that goes in it. I have the outside portion and the chuck , but it needs a small bit to go in it...

I am going to go with the Dunlops as well. The only thing that concerns me are the sidewalls durability.

I've had several Jeep friends run the Dunlops becuase of the price, and they never had any complaints... last guy I saw was fixing to buy another set because he had absolutely no tread left... seems like he had them for a few years...

Sweet. I can get five of them in 33x12.5 with a new rim for the spare for a little less than four BFG MTs in 33x12.50.

ok... snorkel just came in... this looks like fun! Hole saw needed is 86mm which converts to 3.386"? Looks like rest of holes will be 14mm (.5512")... Looks like this, too, was built for the Navara... Anyone know if they make an 86mm hole saw?
*edit* just went to Home Depot... same as 3.5"... anyone got? Part is $15 and I will never use again, so if I don't have to buy it, I'd rather not...

All i have is the 4"... I do have a jig saw, but that can get very very messy unless you have a steady hand.. I am going to bring the jig saw and some fine blades anyways..

Chris - I have the toolbox loaded up and ready to go. It turns out that it is plastic with metal reinforcement. It's a nice box nonetheless. We'll probably get over there around 3 or so. See ya'll then.

See you all tomorrow morning. I'll be on FRS 5 no codes.

Good day for mods. Lights, snorkel, body lift. Again, Ken thanks.

Oh, yeah 15 double cheeseburgers!!!!

I swear I thought that snorkel was going to take longer than the BL! It didn't though. I finally finished it up at around 7 PM last night. Now I just need to build new front and rear bumpers.

I want to thank everyone for their help on Sat... Chris, thanks for the tools... Scott, thanks for the place to crash... Jason(s), thanks for stopping by to WATCH! Anyway... anyone get any pics, or just video?

Just video. I did not realize my camera battery was dead.

Keith said he could grab stills from the video - and it's supposed to be an awesome camera.

There should be enough video on there for 4 or 5 good in-progress shots for both the body lift and the snorkel. I don't know when/if he'll do it tho.

Hey now, I did more than just watch , I just didn't help you much. You seemed to have it all under control Now the other Jason, he didn't do anything but watch...

Hey, wait a minute - I turned a wrench a couple of times while I was there. But it was more fun to drink beer and watch

Hey man I just wired my garage for 220 and have been playing with my New POS 1970s series welder... but I will grab some pics tonight and throw them up...