As a Xmas present to myself, I am thinking about getting a set of the Shrockwork sliders for my '05 but I am hearing that, unlike installation on previous X models, there is some drilling required on the '05.

Anyone here installed sliders yet and how much drilling is required - what size of hole etc ? As I don't have a drill etc, I probably have to go out and purchase one this weekend as well.

I installed them on my 05 back in August. They are mostly bolt on as you only have to drill one hole on each side. I want to say the holes are between 1/2" and 3/4". If you don't plan on wheeling it right away, the bolts will hold it all in place till you are equipped to drill. I mounted mine with bolts only for over a month. When you do drill, definitely get a step bit, as it will make it much easier for you. Jim's included instructions are very easy to follow. Goodluck and they are well worth the investment.

defibvt is local and has shrockworks on his 05. He just bought a new casa so a pm to him might be the best way, I also think he did this at Conumdrums house so he would be a good local guy to ask about install too.

I'd be happy to assist at mi casa if you'd like, however it would be a scheduling issue. As mentioned above an indexing bit would make the job much easier. I had to use my 1/2" bit and wallow the holes out until they were big enough. All in all it was very easy and the Sliders as well as the instructions were very good. There is a thread somewhere where I posted the instruction sheets that came with the sliders.

Merry Xmas!

10% off if you buy 2 sets! I was thinking of ordering mine in the next month or so too, I can push that up a little if you are ordering soon.

I might just take you up on your offer. I have a strong aversion to drilling holes in a 10 week old vehicle

I thought I had already replied to this but here goes again. Maybe the firewall blocked it.

I am thinking about ordering them just after thanksgiving , according to Jim yesterday there is a 3 week lead time so that would put delivery just before Xmas.

Shipping is $68 per set to AZ.

I hope to be at your meeting on Friday evening so we can discuss the details then.

I've got no problem drilling holes in a perfectly new and good frame.

Think we'd get 20% off if we bought 3 sets?
Of course I'd have to get permission from the wife first.

I already have permission from the wife, she can't climb into the thing very easily without them! lol. She is only 4'11" after all.

Doubt they will do 20% off for 3 sets, but they might cut us a deal on shipping if we have all 3 sets shipped together to the same address.

I personally want the powdercoat option on mine, not sure if that adds to the lead time. I'd be up for ordering just after thanksgiving tho.

Sounds like a plan. We could have the shipment come to my work (Childress Buick/Kia) to avoid any residential charges. I'll talk to my wife tonight and see what she says.
Thanks Guys.

You don't ask you don't get. Does no harm to ask !!!

I'll call Jim tomorrow from work and see what kinda deal he'd cut us on 3 sets.

You guys going for the Powder coat, or just gonna paint them yourselves?

You going to be able to make a club meating Phil? We're at Pinnicle Nissan this Friday evening at 7pm if you wanna come see some of the other folks, of course you and I have already met over a Haynes manual once

Powder coated in semi-gloss black for me !!.

Will do my best to be there Friday @ 7pm, I was meaning to attend your last meeting but we had to fly home for a few weeks so that upset the schedule a bit

Now it is your turn to sell on the Haynes manual

Already sold it to a guy on the forum.

Found them at
http://members.cox.net/cmsincpage/Slider_Shrock_05.PDF

Thanks Man! I didn't even think of pointing to my address.. Duh. I was thinking about the thread. The conversation didn't come up last night, but I'll talk with her tonight.

Emailed Jim last night and he said shipping would be $58.00 per set shipped together (Seems a little steep).

Plus the 10% discount would apply.

I am ready to pull the trigger on these on Monday 11/21 in other to avoid any delay in the shipping due to the fact that Xmas is so close.

I would like to have them for Xmas as it will probably be the only downtime I will have for the next 6 months.

That works for me, if you are coming to the meeting on Friday I can write you a check for my set, or I can meet you at work where we met before if you can't make the meeting. I want the same powercoat option you are going for too. So that'll be 2 identical sets for us.

Adam, don't ask the missus. Tell the missus! Yeaa right - Like that's what I do! lol.

Yeah, That would go over good...
I think I want mine to be black powder coat or enamel.

WOO HOOO! I have permission! Let's work out the details tonight at the meeting.

Nice, sounds like a plan. Phil (Scrabo) figured it should come to $380.20 inc. shipping per set. powdercoated.

Powdercoated
$358 less 10% = $322.20
+ $58.00 shipping = $380.20

Bare Steel
$308 less 10% = $277.20
+ $58.00 shipping = $335.20

Bring your check books gentlemen !!!

I'm going to buy an indexing bit or two to add to my tool collection.

Edit to add: I just purchased one at McMaster Carr and I will be happy to put holes in your trucks...

My Shrock Sliders are supposed to be done today, but I'm gonna be outta town 'til Nov. 29 so had to ask Jim to hold off shipping them for a week . May look you up to drill away when I do get them.