What paint did you use for the roof rack, nerfs, grills, bumper etc.? How did you prep the roof rack while still keeping the sticker on? did you still sand and prime with the sticker on, and then just peeled it off after the paint job?

AEM brute force cold air intake, thats all i've done so far, thinking about a body lift, judging by what that silver one below me is, i'm not sure anymore

You guys did some cool things with your X s and gave me some good ideas. I d like to upgrade the cd/radio in the 2006. What do you recommend?

HEY ScottXGTR i got something that will give that q a run for your money

will post more info on my x as i get it in order there is a lot i have done

EXTERIOR MODS:
Custom made billet grille
22" Vivid 201 W/ Hankook Ventus ST 265/35/22
Color mached calipers and drumbs
Streetglow neons inside/outside (BLUE)
Cross drilled and slotted rotors
Painted skid plate
Clear LED euro tail lights

ENGINE MODS:
Aem cold air intake
Flowmaster dual 2 1/2" exhaust
Blue wire loom under hood
Fog lights with angel eyes and strobes
2- kinetic 1800 cranking amps

I.C.E:
7" AUDIOVOX INDASH WITH T.V TUNNER,NAVI,PS2
2-5.8" POWERAQUISTIC T.V'S IN VISOR
2-7" POWERAQUISTIC IN THE HEADREST
1-15.4" FLIP DOWN MONITOR
4-12" KICKER SOLO-BARIC L7
KICKER 2500.1 RUNNIG THE BASS
3-PAIRS OF KICKER RS SERIES COMPONENTS FRONT DOOR/REAR DOOR/TRUNK
KICKER KS650.4 RUNNING MIDS&HIGHS W/ PAINTED CAPS

INTERIOR MODS:
FLAME MIRROR
PAINTED INTERIOR TRIM
CHROME SHIFT KNOB

here are some pics i was able to find i use this as a daily driver i also do some weekend car shows/spl contest

OLD SETUP

Sweet ride!! I love the setup. how did you make the grill, I want one!

through a shop localy they sent it to billet specialties and they took care of it

Not my personal style but I do like the amount of work and detail you have in your truck.....especially since its 2wd....if it were a 4wd well......

Tim

i would hope 4 12s is louder than 1 18. you got some nice stuff in there. but i have a bias against anything with 7 in the name.

ive done 4 12s, 2 12s, 2 15s, etc. i know what yours is capable of. doing it with a single woofer is more fun tho. especially at 30hz.

3" BL, 1.5" SL, 33" Maxxis Bravo A/T Tires, Bilstein Shocks all around, Bilstein Steering Shock, Idler Arm Brace





TruckPuter(Work in Progress)
-See the worklog at:
http://www.mp3car.com/vbulletin/worklogs/93480-2003-nissan-xterra.html

Max pictures/post is 8, so here's 2 more:

I haven't done a whole lot to mine yet.

Switched out the stock tires for Goodyear Wranglers.
Put in the drop in K&N air filter.
Tinted the windows.
Putting in a new deck this week.

It's my every day driver. Got a bike rack for hauling the bikes to the mountain. Gone camping a few times too.

AEM Brute Force, Flowmaster 40 series, silverstar headlights, air horn

how do you like the flowmaster 40?

My ride's an '06 S model 2WD in Granite.

Engine:

-Nismo cold air intake

Interior:

-Nismo key lanyard hanging on mirror
-Nismo steering wheel and shifter covers
-Secondary alarm system with ignition cutoff
-Interior UV treatment
-Mats including cargo area
-Retractable cargo cover
-Dog enclosure
-First Aid kit
-Self darkening rearview mirror with digital compass

Exterior:

-Rear spoiler with matched paint
-Alteeza clear and red rear taillights
-Nismo wheels with Cooper Zeon XST tires at 285/55R18
-Splash guards (now very needed )
-Body side moldings
-Step rails
-Class III trailer hitch receiver with 7 prong wiring
-Backup warning sensors
-SuperSprings rear spring support
-Cool funky Nismo decals
-Nismo tire stem caps
-Xterra license plate frames w/Nismo screw head covers
-A customized license plate with the California whale tail reading "H20 LVR"
-Two white LED light arrays in front grill
-Side marker/signal lamps
-Third brake light (X-TERRA) cover

Surprised you dont have the Nismo oil, gas, rad. cap?

love it, sounds great

holy smoke man, how are you ever gonna use that baby the way it was supposed to be used!!?? How you ever gonna get in the mud with those wussy Tires???

Here is my 2wd.

Looks nice. I am planning on doing something like that with the offroad lights on my wifes Xterra as she has a brushguard and it is rusting out.