Originally posted by xoc:
Don't measure to the body, measure to the frame.
The body is bolted to the frame, and the fender panels are bolted to the body, which adds up tolerances. You could be dead level and the left and right fenders could be off by an inch.
The only accurate place to measure is to the frame where the lower a-arm attaches.
I re-measured mine to the frame, and got the same results as I did to the body, so mine worked out alright. In hindsight, I think measuring to the frame is a much better way to do though.
------------------
Chris McCracken
"He who dies with the most toys ...WINS!"
Join the
Heartland Xterra Owners Club www.hxoc.net
Previous Topic
Index
