Thank you Gonzo,

I appreciate the good advice and I will definitely heed your words. I figure I'll get the stock ones off EBAY or something and then either mount in the locations provided or get 3rd party ones and mount up-side down like you suggest and put in a drain hole. I'll also be sure to use wattage that you recommend due to the fusing as well and the wire harness limitations. I will also look for those bolt holes on the plastic part of the bumper and see if those can't be used for this purpose like you suggest. I'll have to take a look for them to see what you mean exactly.

Thanks again!

respectfully,

Spoonman