Hi everyone,

I have 4 100w lights on the roof. I will be running 8g w/70A maxi-fuse off the battery to a 6 circuit aux fuse block w/20A fuses then to the relay(s) and finally the lights (14g run all around). BTW I am following warmongers set-up where I can. My questions are:

1. I need a weatherproof junction block that I can run the single 8g from the batt that splits into 6 outputs to heat the fuse block. His (warmongers) X has an unused junction block...I can't find one on my '02

2. I want all 4 lights on with one switch. I've installed countless pairs of lights on generic 30A Bosch-style relays but what do I do in this case? I heard about bridging 2 relays at the switch connections but would a higher amp single work better? I would really like to find a relay with a harness instead of the common relay itself with just the open terminal prongs.

Thanks!!