Quote:
Originally posted by kayak_x:
1. Get a BFH and a pickle fork for removing the old UCA's.
2. Put some threadlock on the ball joint bolts when you mount them on the UCA's. You really don't want them shaking out. (Akio didn't that happen to you or was it Huey?). Some people have through bolted them instead.
I think it was Akio. Just use some Locktite Blue as Patrick mentioned. And BFH=Big F-ing Hammer, a 5lb sledge should do it, just be careful not to hammer your thumb. If you want I can lend you my pickle fork on Sun.

BTW, long time no see Patrick, how you been? [Wave]
_________________________
-Huey
NCCX