Hey Tom I saw you on 101 on the way to work again yesterday. I'm was in a green eagle talon but you didn't see me waving.

BTW, I was going to get a set of PowerStop rotors (slotted and drilled) and MetalMaster brake pads for my fronts next. The parts should cost you less than $300 and you can do the install in a hour (2 if you take your time). Dean has a set and really likes them, but I'm not sure where he bought them... Anyways, it very simple to do the fronts, you will need a socket set and wrenches (specifically 17mm and 22mm if I remember correctly), some c-clamps to press the calipers back, jack stands, brake cleaner, a screw driver to help pry stuff off, and a few other things that you probably have.