Emt_diver: I could do that, the wires that run from the bar are small in diameter but the ground cable is at least 10 gauage. Now you take 8, 14 gauge wires and wrap them around a 10 gauge wire and the cover the darn thing with a plastic sheath...You've got a wire loom that is akward to work with..If I cut the sheath off wear it would run into the gap in the rear, that would allow me to get all the wires in but the run the risk of being damaged do to the fact that the protective sheath is cut off. I will take a better look at this weekend and see if it is workable if it is then the bar will be mounted and wired by Sunday and I will have pics up by Monday night.