For those who are too lazy to read a search, the 02 X, works like the 01's for splicing purposes.

Disclaimer: i only tried to do this with the parking lights portion.

{copied from ElektroKen.. so as not to upset him for plagiarizing it}

Use the Black/Red from 2-Pin connector. Cut it off, and tape end that goes back to the truck. Splice harness end of wire into:

"For those that want the ability to turn on the fog lights anytime, connect the 6" jumper wire to the purple wire in the 8-pin connector harness using the tap connector. Note that the headlight warning system will NOT remind you to turn the fogs off if you choose this option.

For those that want the ability to use the fog lights whenever the parking lights are on, connect the 6" jumper wire to the blue/red wire in the 8-pin connector harness using the tap connector. In this case the headlight warning system will let you know if you leave the fogs on."

I skipped the jumper wire altogether and just spliced mine together. Have Fun!!

Don't anyone forget to thank ElectroKen!

[ 02-07-2002: Message edited by: Slec ]