The actual schematic is pretty big and those circuits track across most of it. I don't see a copyright warning on it(I know that doesn't mean it isn't copyrighted), but maybe I can describe it and it maybe easier on me. Let me know if this isn't good enough.
number 1 goes through a resistor and then to a transistor(DTC114ES RN1202) that feeds to pin 51 on an IC numbered
IC 501
LC72366-9262
052-1129-00
the pin is labled aux-on.

Number 2 runs through a resistor and then a transistor(DTC114ES RN1202)that feeds to a second transistor(DTC114ES RN1202)which in turn feeds to pin 50 of the same IC. Pin 50 is labled comb1-on.

There are no voltages mentioned. There is an ohm value listed for number 1's resistor, 47k, but number 2's resistor value is listed as 470 1/2W.

Does this help or do you need the actual schematic?
_________________________
"The trouble ain't that there is too many fools, but that the lightning ain't distributed right."
Mark Twain