I got the back speakers in over the weekend. Even though replaced with 6.5's I ended up having to fabricate a template to get them lined up. Was actually a lot more work than I anticipated (but I have not done this before). And no way am I going to try running new wires! Got lots of pics - will post once project is further along.

I am going to put front components in tomorrow night - is there any way to avoid running new wire for the tweeters/crossovers? Seems that factory front speaker wire must now go from HU to a factory crossover with two sets of wires going from factory xover to tweeter and door. Does anyone know where the factory tweeter and factory door speakers meet - I assume this would be at the factory crossover (if there is one). Best case would be that I leave all wiring as is and just mount the new crossover where factory crossover is. I see a lot of discussion about replacing the fronts and mounting the x-overs in the doors or under dash but not much about the wiring aspect of it.