Forgot to mention: MAKE SURE TO CUT AWAY THE RAAMMAT AND ENSOLITE WHERE THE BOLT/SCREW HOLES ARE!! It is hell to put humpty dumpty together again if you don't. At this point you can start to apply the Ensolite. It doesn't have any sticky stuff, so you have to use your own adhesive. For this I really like 3M High Strength 90 Spray Adhesive, which is good to glue carpet to wood trim and speaker boxes also. Just cut the foam, glue it down, and trim to fit. This process actually goes very quickly, much more quickly than applying the Raammat. As you can see, by this point I had already cut custom speaker mounts for the door speakers. I highly recommend this if you have a jigsaw; it gives you a much more solid fit than pre-made speaker adapters.





The Kenwood DNX7100 is a big one, and adding a bunch of accessories and RCA cables like I did makes it even more difficult to fit in the dash. First, remove the stock stereo: