Here are a few pics of how I mounted my Cobra 75

The unit is beneath the center console behind the shifter. A noise chopper filter is mounted in front of the shifter.

Here's what it looks like when I have the unit out.


Here's with it in.


A lot of the time when I'm using it I'll hang it from the mirror.


Power wires were fed through the big grommet behind the emergency brake on the driver's side firewall.


Engine side showing where the wires run. Wires for the lights are run through the same location.


Main power for the CB (and lights) are fed from a Marine fuse block mounted on the passenger side and tapped directly to the battery.


I may relocate the main CB unit to the back of the center console, though. I thought having it on the flat part was a good idea in the beginning, but since I spilled a drink on it, I've rethought my position. Also, moving it would keep the quick release part out of sight as well.

That's it. Hope this helps.