Next big problem.

So... The OEM Titan lower control arms and the Fabtech steering knuckes had some "turning radius" problems. Basically the OEM LCA hit the knuckle almost immediatly. Wally and the trusty die grinder took care of this by grinding the front and back of the LCA to allow the knuckle a "larger" movment. Not as much as stock, but when assmbled, we won't even know there was a problem.



-MadManX
_________________________
2007 Blue OR Xterra
- Custom RadFlow Coilovers & 750lbs Springs w/ Total Chaos UACs
- Deaver 2 leaf add-a-leaf pack w/Bilstein 5125s & PRG Adjustible Shakles in the Rear
- "Fully Shrocked" by ShrockWorks
- Ramsey 9000UT Winch w/ Synthetic Cable
2007 Red NISMO Frontier
- ShrockWorks Full Underside Armor
- ShrockWorks "Modified" Rock Sliders