Not a problem at all.
Personally, I wouldn't run 2 shocks per side. Definitely cost prohibitive if you run bilsteins.
Coilovers would definitely be cheaper than 2 bilsteins per wheel.
If you have aftermarket control arms, you can probably take it to a fabricator and have them mod the control arms to clear coilovers.
Then run the coilovers in addition to the torsion bars.
That should help out significantly with the prerunner stuff.
The shock length you should look into is 8.5" travel with a shock hoop.
The TC lift is really nice, but a bit pricey.
Just about as much as a SAS, but you are increasing the track width.
There are a couple people running it on here with great results.
Contact EditorX for more info. He's been running it a while.

I didn't want the increased track width, so I'm just going to reinforce the lower control arms, mod the uppers and run custom shock hoops.

Good luck with your build.