Not only the camber bolts, but the washers and nuts as well - since they are sold separately.

While TJ's right aboug PB blasting everything, you still may want to consider getting a sawzall and / or plasma cutter ready. The reason being that the nuts on my UCAs came off so easily that the group of us thought it was going to be a cake walk from that point forward. 8 hours and 15 blades later, we all knew how wrong we were because the bolts had been pretty well welded inside the bushings.

Also, when popping the ball joints, while a pickle fork may help you out, be prepared to break out the BFH to pound the you-know-what out of them until they pop out on their own. In fact, there are a few people that suggest using the BFH from the start and, if I knew then what I know now, I'd have to agree.

Good luck and post up pictures when you're done.

I have the SLR Stage product and have been very pleased with them.