When I had my truck aligned here are the specs they gave me on camber:

Nissan spec is 0.1 to 1.1 degrees on each front wheel, they were able to get the left one to 1.0, the right one to 1.1.

Cross camber spec is -0.8 to +0.8, mine is at +0.4.

The only thing they couldn't quite get back into spec was the left and right caster (cross caster is within spec, though.)

Any chance you cranked up the lift more than you meant to?

------------------
Vikram/gothamist -- MAXC member
http://www.4x4LO.com