The absolutely BEST way to see how you would look with a 1.5" lift, assuming you can't just imagine the tires staying on the ground, and the rest going up 1.5"...is to measure the wheel well peaks at all 4 corners, and then, put a jack under the truck, and jack up 1.5", with jack stands as needed if no floor jack..etc.

Then stand back, and look at the truck from all angles....that's it...exactly what YOUR truck will look like.



(It will look about the same, but 1.5" taller if that saves you any time.)



Other trucks have different sized tires, especially after the PML...so the tire/well spacing won't look like your truck anyway...but, if you are also doing an upsize on the tires, that might be ok.

Good Luck!