Originally posted by FULL-THROTTLE:
JUST A QUICK NOTE, WHEN YOU SET THE TIMING DID YOU SET THE COMPUTER UP PER THE MAINT. MANUAL, YOU NEED TO ENSURE THE COMPUTER IS SET TO THE APPROPRIATE ADJUSTMENT, YOU CAN USE THE ADJ SCREW ON THE R/SIDE OR USE A HANDHELD CODE READER. JUST CHECKING, I JUST DID A TIMING BELT, WATER PUMP, TENSIONER AND THERMOSTAT TWO WEEKS AGO SO I AM FAMILIAR WITH THE TIMIMG ADJUSTMENT.
JUST SOMETHING I NOTED WHILE SETTING MINE.
GOOD LUCK
If the intention of caps lock was to attract attention to your post, then next time you should rather make a regular post and put the importnt key points in bald.
A lot better to read than your caps.
Previous Topic
Index
