Hey Guys,
Just wanted to drop by and tell you guys about the build a little bit.
Yeah the kit was originally made for a HP Axle and the front drive shafts starts to bind up just a little at full droop. but i'll be modifying the bracket/truss for the upper link to kick the pinion up and also push the axle forward a little. Whatever i come up with i'm going to do what i can to get them made eventually working towards a full SAS Kit.

Why All-Pro makes the bracket for the wagoneer D44 Low pinion axle is still a mystery to me.

The front driveshaft pinion or any other parts do not hit the exhaust.

My next post will be full of pics for you guys.
feel free to ask any other questions and don't be affraid to also contribute to the Rugged Rocks Board.