Thanks guys! I just got back from Amarillo last night, went to see the wife's family over the long weekend.

The shackles are from the HB kit of Calmini's. So is the front hanger. It fits nice! I would've moved the shackles backwards further on the frame, about 1/2" or so for the next one. But you'd have to redo the body mount support at that spot. I didn't feel like doing that, so I had to make some clearances for where I chose to put them. Not too bad though. That was with the stock Waggy springs. I'm sure a lifted set of springs wouldn't have had that issue. And no, they're not revolvers. Didn't need any spacers for the shackles either. Those are how they come from Steve.

The 9" rear actually needed a longer driveshaft. The nose of the 9" is shorter than the H233B. I got the shaft made 4" longer than stock. The 9" will also facilitate the rear disc conversion, as there are many, many kits out there for the Ford axle. Any gear ratio that you want is available as well. Highly reccomend using the 9'er in the back!