Started working on stripping the truck down for the SAS..

It took me a couple hours (by myself) to remove the front driveline (halfshafts, front diff and front driveline)

Yesterday I took out the upper and lower control arms. Here is the result.



I will post more pics over the coming days as the truck comes together.

So far there the teardown has not been difficult and anyone with basic tools can do it.

Some things you will need to make life easier are :
Good 3 ton floor jack and matching stands
Pry bar
5# Hammer
Angle Grinder (with both cutting wheel and grinder)
Sawzall (I am using a DeWalt)
Good weather (truck wont fit in the garage)

See ya in Moab!