I have a Dana 44 high pinion front, and a Ford 9" rear. Both off a '79 Ford Bronco. 5.38 gears in the front, 5.42s in the rear.

These are "full width" axles, though honestly they're "perfect width" if you ask me... The stock width axles are kind of narrow if you're going pretty tall (35's & up), IMO.

Only "downside" to these axles is that they have the cast-iron C-wedges in the axle tubing, so you either have to run Ford Radius arms (or upgraded Ford arms), or know someone that knows how to weld onto cast-iron PROPERLY...

I paied $400 total for both axles.