5.slice a slit into the firewall and run the two wires thru(red arrow). be careful, the terminals are on the end and can bend easy. if that happens it will be crappy getting them into the mirror plug.

6. run the wires up the left side of the foot well and the a pillar and leave them on the dash for now.
7. Use the supplied terminal splices to splice into your 12 volt constant and switched. (red arrows) the pictures show you were. Kick panel is switched and a pillar is constant.


8. You will need to good ground. there is no ground bolt on the A pillar (like the 05 fronty) in the X. i had to look elsewhere. the kickpanel was home to a good ground with a bolt that did nothing.(red arrow) it is 12mm

9. the supplied terminal end was too small for this bolt so i spliced in one of my extras in my wiring kit. fit great.