I could have told you that we had specific/unique bolt patterns. Search... 6 on 4.5

Hmmm... another item in this thread... if you want to go 33x12.50 does that imply 15" rims? I believe someone also tried that in a shop and it did not work - the brake calipers were too big. Someone correct me on that one if I am wrong.

Yes, the 285s rub the skirt at 70% turn. No adjustments needed on the steering stops.

Also, under compression in the rear fender wells there is rubbing with the 285. A 35" tire (or equal in 315?) will not fit unless further modifications considered. At that time, a 35" tire may cause structural damage to your axle if you wheel it.

There are probably going to be rubbing issues with skirt items. Pull out the heat gun and warp it if you concerned.

I think we are going to see alot of options open up right before Christmas. I would tend to believe that the holiday season is a big sales opportunity.

Daystar, Calmini and SLR will soon have there stuff out. Just stay tuned and be patient. Hell, I've been waiting since Feb. 26 with cash in the bank. I'll tell you about being patient.