Hey Guys,

I installed mine about 2 days efter I bought the truck. The install is not to bad. You have to remove both plastic kick panels, both door sill plates and the welting on between the doors and the body. You also have to remove both plastic grab handles from the "A" piller and the plastic covers under the handles. Why remove both sides. Because the Temp sensor wires come up the passenger side and the power wires come up the drivers side "A" pillers.

The temp sensor wiring goes thru the wiring boot in the firewall on the passenger side of the truck and the power is sourced from the fuse box directly using a funky fuse tap device which came in the kit. the instuctions reference fuse #20 7.5A ELEC-ACC 6th from the top and 4th from the left.

The Nissan Part Number is 999L1-AM001 and I got a heafty discount of the mirror from my dealer. The price I got equals the price on XterraParts.com less shipping of course.

One prerequisite, YOU MUST HAVE THE WEDGE TYPE MIRROR MOUNT. No exceptions here. The mirror will only slide on and tighten up on the wedge mount. XterraParts.com sells the replacement wedge mount to glue on your windsheild but I would not try and remove the old mount unless I had full coverage insurance 0 deductable on glass breakage.

There are one or two more tricks to the install but I have wasted enough server space already. Post further questions here or email me. I am going to putting together a how-to for the site for this install in the next few weeks. wink

Ekh.
_________________________
The marksman hitteth his mark partly by pulling, partly by letting go.