Originally posted by cobain913:
Ok the front bolts got ripped out of the threads Now imagine the bumper pulled forward enough so that there is about 1/4" or so of space between the front mounting points and the end of the frame horn itself Now picture that but the bumper tilted in a downwards position.
This sounds like the threads simply pulled out of the ends of the frame horns and the bumper rotated down a bit. If the threads did pull out the ends, it *would* rotate down and point downward some bec the side bolt holes are slotted. Are you sure the bumper is bent and not just pointing down? It certainly doesn't sound like the bumper "broke" ...
Previous Topic
Index
