No Jim. I don't thin the bumper broke but the bolts certainly got puleld out of the frame horns...The thread on the bolts looked ok but there was al ittle bit of metal surrounding them...No deformaty to the threads on the bolt themselves though. The bumper itself I don't think bent either. I am jsut concerend about how I am goign to get the bumper in its correct position again if the frame horn threads are stripped. The bumper is definately tilting down becasue as mud4x4 said, when they guys were pushing me it would move up and down...This may have been since the bumper was puleld forward and out and gave it the play there. I will check to see if the bolts on the sides were loosened when I go to pick it up. If this is the case then there maybe damage all around on the threads to my frame horns. But trust me...Those bolts were tightened down like hell.