i have a 2002 x with 108,000 on it ,so i decided to get the courtesy timing belt kit.
got everything off and spent alot of time trying to line up the belt. the belt has 2 solid lines and 1 dotted line,i put the crank at tdc on #1 and lined up the cam pulleys with the marks on the back plate just how my book shows.the 2 solid lines do not lay on the marked spots on the cams but the dotted line and a solid line do, so that is how i set it up.got everything back together it started right up but was idling high and then i shut it off and tried to restart it and it started hard and did not sound right so i shut it down.i am going to tear it down again to try to figure out what is going on.
anyone have any suggestions on how i may better line up the cams and crank so hopefully i can get this belt on correctly .
thanks