Originally Posted By: DiBo
I just bought mikes 2000 xterra. It's lifted a bit more in the rear than the front. Are there any front spacers available for the 2000? I can't find any. It needs to go up like 1.5" [img]http://edmonton.kijiji.ca/c-ViewAdLargeImage?AdId=368522928&back=-1&ImageIndex=1[/img]


You don't have front coils on a 2000 Xterra, you have torsion bars.

That means you can raise the front end 1.5" for free, by just rotating the built-in torsion bar adjusters to set a new higher ride height.



PS - Just in case you didn't know this either, the front is supposed to be ~ 1.5" lower than the rear.

IE: If you thought you needed to raise it ~ 1.5" because the front was lower, you don't need to, its supposed to be that way.

laugh



Edited by TJ (08/04/12 07:18 PM)
_________________________
- TJ

2001 Xterra '03 VG33, SE 5 spd, 305/70/16's, Revolvers, UBSkidderz, Doubled AAL's, 3"SL/2"BL, winch/bumpers, skids, sliders, OBA, Snorkel, pine stripes....

Friends don't let friends drive stock.

http://www.gifsoup.com/view/501230/tj-tackling-crawlers-ridge-o.gif