It seems to me that once you put the overlay in it still seems to be to high and does not sit correctly and then needles were sticking to the guage. I tried taping it down but was kind of limited to the space so it would not show. Does anyone know if there is a way to raise the needles with out breaking them. To be honest I get a little scared when screwing around with all that stuff and don't want to hurt the brand new X. Another problem that I ran into was which wire is the parking lights. In the previous install instructions from this forum it says the black and white striped wire, but I have the 03 X. Does anyone know which wire is the parking light for the 03 or does it remain the same.