I got mine in and they look good. The biggest hang-up for me was finding the parking wire to tap into. I used one of the wires (the blue/red one) from the wiring harness (brown plug - left side) that goes to the instrument cluster. I was trying to search online and found nothing, then the XOC was closed. I ended up using my DVM to test wires individually. I got the right one in two tries.

The second thing was that the speedo needle was getting stuck around 70MPH. this was because of a high spot where the gauge wasn't sitting flat against the old gauges. I fixed this by doing a better tape job around the gauges.

Also, in order to really line up the idiot lights, you need to temporarily hook up all the connections and turn on the ignintion. this was you can line up the lights and tape it up so it won't move.

All in all, it was slightly difficult, but I could easily do it again.