I need some help guys.

Well, just replaced my A/C high pressure line and found this vacuum hose laying in there. At first I thought I knocked it loose, but then I couldn't find a place to hook it back to.

I couldn't ascertain an answer in the FSM and can't print out the schematic out (no printer) to take down to the truck.

The hose has a plastic connector in it, as though it hooks to another hose. I did find an open looking hard-line, but the hose I found won't reach it and the two wouldn't connect unless I'm missing an entire piece of line. Any suggestions?

Here's the hose and where it hooks to



The open appearing port is underneath this connector next to the air inlet



Here is the port, slightly visible in between the electrical connector and the black hose





Any thoughts are appreciated. Thanks in advance.