I'm thinking of a small modification for my 2001 Xterra, adding two push-button switches (one for the windshield the other for the rear window) wired to activate the windshield washer pump without starting the wipers (to prevent the wiper to run on a dry window and scratch the glass)...
After examination of the schematics, I came to these conclusions:
- Both (front and rear) washer pump have always their positive side connected to the +12v, they are activated by connecting the negative side to the ground.
- The control module starts the wiper as soon as it detects that the pump is running so I must use a relay to disconnect the motor from the module and connect the ground directly.
Any idea or opinions are welcome.