Just the 4 bolts that hold the a-arm in place... Takes about 30 minutes for both sides (and that includes jacking up the car).
Just look at the lower arm that the hub and lower control are are bolted too... Follow it to the frame and there they are. One up front and one in the back (both side of the arm when looking at the tire).
Be sure to get an alignment ASAP after the swap. If you need pics let me know I'll get you some (I have a bunch).
-MadManX
_________________________
2007 Blue OR Xterra
- Custom RadFlow Coilovers & 750lbs Springs w/ Total Chaos UACs
- Deaver 2 leaf add-a-leaf pack w/Bilstein 5125s & PRG Adjustible Shakles in the Rear
- "Fully Shrocked" by ShrockWorks
- Ramsey 9000UT Winch w/ Synthetic Cable
2007 Red NISMO Frontier
- ShrockWorks Full Underside Armor
- ShrockWorks "Modified" Rock Sliders