Anyone interested in helping me install a new centre link, idler arm and manual hubs this Saturday? I have all neccessary tools!

I'll buy the coffee and doughnuts!!!

Paul.

It looks like this Saturday is shaping up to be the mod day. I'm a newb, but I'll help in any way I can.

Gary

Thanks Gary....I just need a place to do the installation. Unfortunately, the assh*les that own the garage where I park forbid anywork being done on vehicles including washing!!!

CU Saturday?

Paul.

I can probably do Saturday...shoot Todd an Email about using EOE. Otherwise, I'll offer my driveway....it's gravel, but I have plenty of space and parking..plus Air Tools

Rich

1 more thing...if it is at EOE, I'll most likely be working on stuff in the shop, so the garage will occupied. How is the weather for Saturday??? Looks like the Mod-Day will take place outdoors regardless of location.

CYA

Rich

I sent an email out asking if we can get EOE. If it works, then I'm in. I got lights to install.

i just watched the weather...its gonna be in the upper 70's with a good chance of rain....
i would go, but i don't wanna get wet with paul around, he might wanna jump my bones...
besides, i'm working and taking the following saturday off to go away...

yahoo ate my email
but i sad that i am in for most of the day on saturday

Does EOE carry torsion bars?

If they do (or don't) I could use a little T-bar tweaking which probably will require some re-indexing action.

Other than that, I'd be game to see y'all again, share war stories and help out.

??? Where did you send it to??

I will not be available to come by on Saturday[looking at an 77 Bronco ] so it's up to Rich if he wants to open up the shop. I am not sure what Rich has on his agenda but he might be doing work for me so if he needs the space in the shop please understand he might not be able to make room for a truck inside...but there is plenty of room to work outside the shop.

BF: If you want torsion bars for this weekend just let me know.

Well Rich? What say you? I think we can make do with you working on Todd's chores (except for maybe the centerlink project). Let us know.

Hi All,

Are we on for a MOD day at EOE's carpark?

Say 10am start?

Sorry to post here buy Yahoo is eating stuff again!

Paul.

Nick,
I wouldn't "jump your bones" or "kiss you under the mistltoe" if you were the last piece of *ss left on the planet and I was the biggest shirt lifter in the Universe...come to think of it I wouldn't kiss you under general anesthetic!!!
Paul.

I'm in for Saturday....10AM sounds just about right. I'll be working in the shop, but I'll be able to lend a hand or 2 to whover needs it. I just did my center link and Idler arm, so I guess I'll be the resident expert

See ya Saturday

Um, Paul- NJX is Ari. He's the one worried about you jumping his bones. I know you're a happily married man and would have nothing to do with me. Ari is insecure like that.

Actually, everybody who went on the last run has done the idler arm install. We all watched Dave and Steiny do it during lunch.

My only MOD day rules for Saturday is Nick must say "righty tighty, lefty loosey" 3 times, before picking up a wrench or socket, and Oleg is banned from Power/Air tools, unless properly supervised.

ROFL!

Hey, someone send me directions, I've never been there before... I'm coming from the Island.

Getting to EOE is fairly easy. The Zip code for Newton, NJ is 07860...check it out on MapQuest for a general Ideal.

You'll need to get on 80West, to Rt206 North(Offhand I forget the exit number, but it's clearly marked..something in the 20's I think) Stay on 206N, till you enter the town of Newton. When in Newton, 206 will have some funky turns, but stay on it. Take a left turn onto Mill St. (Hayek's Market is on the corner). Once on Mill St, you'll pass a fire house on your left, and after that a VERY SMALL Strip Mall on your right. Take the 2nd driveway past the strip Mall...the shop is in back of a large brick warehouse.

If that doesn't help, I'll try to write you better directions, and Email them to ya.

Rich

Cool, thanks Rich. I think that should probably do. Worse comes to worse, give me a phone number of the shop or something and if I get lost, I could always call up.

Luckily, I don't have much to install- just fog lights. Not much use for a wrench.

Mike :
Look me up on AIM !

Rich ? WTF?

Todd care to tell Rich , what you told me on the phone (there was a hole there, and you had a repair kit , you just never got to repairing it )

:p

(atleast i dont fuck up dril bits )))))))))))))) )

Cool - Mod Day. I don't have anything to do either, but I'll help.

Hey Paul - I've never changed a distributor cap, what should I look for/what did you see to know that yours went crappy? If anything I'll change that out if needed. Is there a Nissan dealer near EOE?

I think i'll wait until tomorrow to check the cap - its going to hit ~94 today

D

Yes
on 206
between 80 and eoe