For all of you SAS junkies out there here are a few new shots of the optional sway bar for the Calmini SAS kit. The tube that hold the sway bar will be standard, but the bar, ends and brackets will be optional.

There will be a separate drive line kit, sway bar kit, and rear spring kit. All of these parts will be based on a car running 33" tires. These kits will be optional so folks going over 33" tires won't have to pay for items that they won't be able to use.

The sway bar has helped out the onroad driving quite a bit. The shocks were set up a little on the soft side. They are now set up a little stiffer and along with the sway bar allow for very good handling on the turns. I will be trying it out offroad over the next few days and reporting back.

-Doug