Hey guys, i have tried and failed to find a trackbar bracket for my calmini sas...I know plenty of you guys have it and know the dimensions. If you guys could please provide me with a link i would greatly appreciate it

check out ballisticfabrication.com. They have almost any/every type of bracket you could need.

Here is the best linkage for that job.

http://ballisticfabrication.3dcartstores.com/Panhard-Trackbar-mount_p_24-1399.html

it seems like that thingj would get in the way of the brackets that are already on the d44 from the calmini kit

are you guys positive it wouldnt

Well if you are looking for a straight weld on one... that isnt it. You will have to modify it (drop it down, modify atachment point to axle) or come with something from scratch.

Kev, I think he's looking for the bracket you used to make your trackbar mount double sheer.