For those of you like me that need to get some work done on or add something to your Xterra but are a little on the novice side when it comes to wrenching on your truck (or you just like to work in a group setting) Huey has offered up his garage for another "Mod" Day.

We are going to have it on November 12th, 2005....starting at 9:30am. Of course Huey is nice enough to lend out his expertise, garage and tools......you just have to add in the elbow grease and parts to get the work done you need to do (whether it be adding a bumper to simply doing an oil change).

Use the following address to mapquest directions to Huey's house:

3105 D St.
Hayward, CA 94541

I will bring donuts and juice to start the day.......of course any work you need to do we would just ask that you bring all the needed parts/fluids/accessories to finish the job. Also....if you are changing fluids if you could bring some extra shop rags or towels that would be much apprecaited as well. Disposal containers would be a big plus as well.

So if your coming.....sign up below and list what you hope to get done and what time you plan on being there. Thanks!!
--------------------------------------

1. Slamson00; install PML front and back; Calmini idler arm brace, replace rear window regulator; 9:30am
2.
3.
4.

I'm not sure if I have anything on my own to work on, but I might just show up and help you guys...

Sounds great Akio.....if you in the area come on by.

Hey All,
Count me in...
I have a few bulbs to change, and George & I are going to make his light bar and install some off-road lights.

So if your coming.....sign up below and list what you hope to get done and what time you plan on being there. Thanks!!
--------------------------------------

1. Slamson00; install PML front and back; Calmini idler arm brace, replace rear window regulator; 9:30am
2. Akio; To Help Out
3. Andy; Bulbs, George's Light Bar & Light Install
4.

1. Slamson00; install PML front and back; Calmini idler arm brace, replace rear window regulator; 9:30am
2. Akio; To Help Out
3. Andy; Bulbs, George's Light Bar & Light Install
4. George, yup i'll be there.

BUMP!

BTW, the Eagle is officially gone. The rolling shell was towed away by it's new owner a few weeks ago.

Bummer. Well, time to get a G35x! Uh, assuming Infiniti ever decides to make it in a COUPE. Heh.

Whoa! Gave up on it, huh? After all that work we just did to it, too!

So, what's on your short list of replacement commuter cars?

I love love LOVE! the way the G35 coupe looks, as a matter of fact I went to test drive it a few weeks ago, but it's impracticality got in my way...the trunk is wayyyy small (there's a diagram in there that shows *or proves to you*, that you can fit 2 sets of golf clubs in there) and very shallow, you can't fit real humans in the back seat, and there was an awful lot of road/wind noise at speed for a luxury vehicle. It's so bad I would just rather get a Z and be smart about the space issues.

The sedan on the other-hand is just not my cup of tea...

Yeah, i just didn't want to start tearing down the engine so that I can drive it for another year only to keep thinking about buying a better car. I basically cut my loses on it. BTW, I don't think I will ever buy another Mitsubishi.

Soooo...the list is sooooooo short that i already bought it! but, you will have to stop by this weekend if you want to see what I bought.

That alone is a good enough reason for me to come up this weekend to see the car... I mean to help Ryan... :p

Ya'll need a welder/iron fab' tools?

Wow sounds like Huey is inviting us to crawl through his new ride and check it out? Your new car smell may not last as long as you thought if I work on the truck first then go climbing through your new car?

By the way.....does anyone have a SWR meter I can use on Saturday to help tune my CB radio and antenna set up? If you are coming and have one I would really appreciate it if you could bring it along with you. Thanks

Ryan

I'll bring one over... I hope I can remember...

I've already driven Huy's new car, so I'm going to ruin his surprise (sorry Huy). It's a beast! Here's a picture.

Huy\'s new ride

- Matt

Wow... Zoom, zoom...

Not just any Yugo, a TURBO Yugo! Matt's thinking about selling his WRX for one also.

Here's a better pic.

will plan on being there also. hope to install sliders.

1. Slamson00; install PML front and back; Calmini idler arm brace, replace rear window regulator; 9:30am
2. Akio; To Help Out
3. Andy; Bulbs, George's Light Bar & Light Install
4. George, yup i'll be there. [Big Grin]
5. Chris , I got my new shrockworks sliders(2005) and could use some help

i may show up to lend a hand & hang out ...

1. Slamson00; install PML front and back; Calmini idler arm brace, replace rear window regulator; 9:30am
2. Akio; To Help Out
3. Andy; Bulbs, George's Light Bar & Light Install
4. George, yup i'll be there. [Big Grin]
5. Chris , I got my new shrockworks sliders(2005) and could use some help
6. Robert

Just to update work load for me:

1. Slamson00; install PML front and back; Calmini idler arm brace, install and tune CB antenna; 9:30am
2. Akio; To Help Out
3. Andy; Bulbs, George's Light Bar & Light Install
4. George, yup i'll be there. [Big Grin]
5. Chris , I got my new shrockworks sliders(2005) and could use some help
6. Robert

Hey Andy, I saw ur Rig off Whipple near the Dealerships on my lunch break.

Yep, you did...

I was getting some diamond plate sheet metal at Alan Steel for my powertank mount. I need to extend my mount out about 3 inches.

I took Thursday thru next Tuesday off work...YEA!
A well deserved break...

You'll see the completed powertank project on Saturday...

I'll see you all there:

PS: NiCe CaR HuEy...?@#%$^&*

FYI... I wll likely to be there early afternoon. I have to do oil changes on 2 cars in the morning...

BTW, Bob says "Hi" to everyone... He finally settled w/ a good job, and they now live...or work (I forgot) near Tulsa, OK. They are also completing the process of buying a house on a 5-Acre lot.

I want to thank everyone for coming out and making yesterday a productive day.....and thanks again Huey for loaning out your garage and tools....and to eveyone else that brought tools for everyone to use thanks as well.

By the way.....with my PML in place I made it into my garge by less than a 1/4". I am going to have to drive in real slow untill the back settles back down a little.

did you put in aal's, or shackles.. if it was shackles, try fitting on empty.. you may have "fun".. the shackles won't make the back settle any* faster then stock.

* if you can cause the rear springs to overarch, like jumping, or hard core offroading. You will damage them, and make them settle faster then normal.