shrockworks xterraparts
XOC Decal
Newest Members
Glim, ChossWrangler, Patman, ChargedX, Randy Howerton
10084 Registered Users
Recent Posts
ECXC 2024!
by Tom
17/04/24 01:48 PM
2002 Door Opening Trim
by OffroadX
01/04/24 08:32 PM
XOC Still Lives
by OffroadX
01/04/24 08:31 PM
Shout Box

Who's Online
0 registered (), 35 Guests and 0 Spiders online.
Key: Admin, Global Mod, Mod
Page 1 of 2 1 2 >
Topic Options
Rate This Topic
#116360 - 12/09/03 12:13 PM RUBICON! Mid Oct.
Huey Offline
Member

Registered: 27/03/01
Posts: 1812
Loc: Hayward, CA
Ok, who's in?

I just spoke with Marty and he's interested. No official dates yet, but let's hear when you guys can take off... We will probably need 3-4 days to run it so remeber to take off Friday and possibly Monday to complete the trail.

Also if you have any spare parts to bring along post that too. I've got some tierod adjusters and auto hubs.

BTW, if you want to come, come prepared for carnage and equiped to run the trail.

------------------------

1. Marty
2. Huey (my vote is for Oct. 17-20 for now)
3.
_________________________
-Huey
NCCX

Top
#116361 - 12/09/03 12:34 PM Re: RUBICON! Mid Oct.
Dos Equis Offline
Member

Registered: 29/05/02
Posts: 104
Loc: Concord
Is this trail OK for stock vehicles [Too much XOC] J/K You guys are nuts. I got a bit of that trail in one of Rick Warrens videos, no thanks, I like my paint job and I don't need any additional body work. Any of you guys ever run the Ducey (SP?) trail. I hear that is even harder than the Rubicon. By the way I bought a tow strap (3" 30' 30000 lbs) and a come along, so if you ever need to get yanked, give me call and I'll see what I can do. Provided you are not on the Rubicon that is. [Laughing] The guys at 4 wheel parts suggested a $20 D ring that was like 3/4" thick. Is that really necessary? [Wave]
_________________________
What Road?

Top
#116362 - 12/09/03 12:56 PM Re: RUBICON! Mid Oct.
Huey Offline
Member

Registered: 27/03/01
Posts: 1812
Loc: Hayward, CA
Quote:
Originally posted by Dos Equis:
The guys at 4 wheel parts suggested a $20 D ring that was like 3/4" thick. Is that really necessary? [Wave]
Nah, just go to Orchard Supply and pick one up a similar one for $7-10.
_________________________
-Huey
NCCX

Top
#116363 - 12/09/03 01:09 PM Re: RUBICON! Mid Oct.
XSAL Offline
Member

Registered: 05/04/01
Posts: 1685
Loc: 94043 -> 19355
Enjoy the Rubicon, guys... smile It's not the kind of trail I want to try...just yet.

Huey, remember to use your new digi. camera... I expect to see over 100 pics from you. wink
_________________________
Who's missing? And, where about?

Top
#116364 - 12/09/03 02:28 PM Re: RUBICON! Mid Oct.
johnnyx Offline
J
Member

Registered: 18/08/00
Posts: 4659
Loc: Scottsdale, AZ
If I were still in the Bay Area, I'd go too. wink

(In one of your Xes!)

Have fun and definitely take lots of pics.
_________________________
Cheers!,
-John

Top
#116365 - 12/09/03 02:43 PM Re: RUBICON! Mid Oct.
XPLORx4 Offline
Member

Registered: 23/03/01
Posts: 1906
Loc: San Jose, CA
When does daylight savings end? If I remember correctly (think Deer Valley, episode I), it gets dark around 5pm in October. :rolleyes:
_________________________
4x4 in uppercase is $X$!!!
1997 R50: VG33E/RE4R01A/TX10/3.7/R200A/ARB/4.636/H233B/ARB/4.636/321150R15

Top
#116366 - 12/09/03 02:52 PM Re: RUBICON! Mid Oct.
Huey Offline
Member

Registered: 27/03/01
Posts: 1812
Loc: Hayward, CA
Quote:
Originally posted by XPLORx4:
When does daylight savings end? If I remember correctly (think Deer Valley, episode I), it gets dark around 5pm in October. :rolleyes:
Daylight savings ends Oct. 26th .

No more excuses, add your name to the list! :p laugh
_________________________
-Huey
NCCX

Top
#116367 - 12/09/03 06:17 PM Re: RUBICON! Mid Oct.
Tolleyy Offline
Member

Registered: 07/11/01
Posts: 441
Loc: Wheatland, CA
Quote:
Originally posted by XPLORx4:
When does daylight savings end? If I remember correctly (think Deer Valley, episode I), it gets dark around 5pm in October. :rolleyes:
I could never forget that trip [Too much XOC]

You guy's have fun on the rubicon... maybe I'll come up and play around a little, but I won't run it with a stock centerlink, no gears, and 31's :rolleyes:
_________________________
04 Titan LE CC BT OR E-locker Hypertech max energy DIY airbox mod PAC-Audio IPOD navigation video interface with night vision back up camera 295/70/17 Terra Grapplers Bilstein 5100's all around with 08 PRO4X springs up front and lovin it!

Top
#116368 - 12/09/03 06:33 PM Re: RUBICON! Mid Oct.
XPLORx4 Offline
Member

Registered: 23/03/01
Posts: 1906
Loc: San Jose, CA
Quote:
Originally posted by Huey:
Daylight savings ends Oct. 26th .

No more excuses, add your name to the list! :p laugh
Then my vote is for pre-Oct 26! laugh

I just ordered new rear springs from AC, and I'll probably try to install them next weekend, and see how I do on the Xterra Championships runs. I found out that my rear springs are currently 1" lower than stock! eek
_________________________
4x4 in uppercase is $X$!!!
1997 R50: VG33E/RE4R01A/TX10/3.7/R200A/ARB/4.636/H233B/ARB/4.636/321150R15

Top
#116369 - 12/09/03 06:40 PM Re: RUBICON! Mid Oct.
XSAL Offline
Member

Registered: 05/04/01
Posts: 1685
Loc: 94043 -> 19355
Quote:
Originally posted by XPLORx4:
I found out that my rear springs are currently 1" lower than stock! eek
eek If that's true, it is/was very impressive that you have been through places like Moab...Sourgrass...etc. this year. eek
_________________________
Who's missing? And, where about?

Top
#116370 - 12/09/03 07:45 PM Re: RUBICON! Mid Oct.
sonnyc Offline
Member

Registered: 24/08/01
Posts: 271
Loc: SJ, CA.
Quote:
Originally posted by XPLORx4:
I found out that my rear springs are currently 1" lower than stock! eek
Wow... I noticed they are low but didn't realize they are that low. eek Did you order both front and rears of just rear?

....
_________________________
Jumpset

Top
#116371 - 15/09/03 10:43 PM Re: RUBICON! Mid Oct.
Huey Offline
Member

Registered: 27/03/01
Posts: 1812
Loc: Hayward, CA
If you guys don't mind I need to move the dates up a week to Oct. 10-13 (due to work related deadlines), this may help a bit with daylight hours too. Let me know soon if these days will work for you and I'll ask for them off at work.

1. Marty
2. Huey (Oct. 10-13)
3. Dean (and weekend pre Oct. 26th)
4.

I'm getting excited! smile
_________________________
-Huey
NCCX

Top
#116372 - 16/09/03 11:14 AM Re: RUBICON! Mid Oct.
XPLORx4 Offline
Member

Registered: 23/03/01
Posts: 1906
Loc: San Jose, CA
Quote:
Originally posted by Huey:

I'm getting excited! smile
I'm getting nervous! [Uh Oh !] wink

1. Marty
2. Huey (Oct. 10-13)
3. Dean (tentatively Oct. 10-13)
4.
_________________________
4x4 in uppercase is $X$!!!
1997 R50: VG33E/RE4R01A/TX10/3.7/R200A/ARB/4.636/H233B/ARB/4.636/321150R15

Top
#116373 - 21/09/03 03:07 PM Re: RUBICON! Mid Oct.
Anonymous
Unregistered


It looks like a good friend with a jeep and many hours on this trail will be running it with us. He's well equipped with a winch and 35". I should have a new clutch and oil pan for this trip.

Top
#116374 - 22/09/03 09:39 PM Re: RUBICON! Mid Oct.
Huey Offline
Member

Registered: 27/03/01
Posts: 1812
Loc: Hayward, CA
Alright, just a few more weeks! [Geek] [Freak] [Too much XOC]
_________________________
-Huey
NCCX

Top
#116375 - 22/09/03 10:20 PM Re: RUBICON! Mid Oct.
MickB Offline
Member

Registered: 25/05/02
Posts: 35
Loc: Grass Valley, CA
This is awfully tempting.....yesterday I ran Wentworth Springs trail almost to Ellis Creek. Thank god for the Calmini Steering & Roger Brown's RockSliderz! As it is, I still managed to bash both corners of my rear bumper on rocks when I was trying to get through probably the most difficult obstacle. I ended up sitting with both front tires about 4 feet in the air, rocksliderz on both sides on rocks. With the rear detroit locker, I was still able to back out of it. That's when I bashed my rear bumber corner end caps and put my spare tire into a rock too. This was the only bypass I took. I made the first "step" obstacle on that hill without any problems. Those were some HUGE rocks. On a few occassions, I was sure that the side of my Pathy was against the boulders/rock walls along the trail. This was the largest rock gardens that I've taken my Pathfinder through to date.
It was awesome and as soon as I get my pictures onto disk, I'll postem up on my cardomain and let you know.

Marty, have you been into the Rubicon via Wentworth Springs trail? If I understand correctly, without looking at the map, this is one of the entrances to the Rubicon.

At any rate, I have some repair work to do on my Pathfinder before I go out and beat it like that again. A transmission/t-case Skid plate is going to be a must! At this point, I'm not going to add my name to the list...I probably won't be ready for the Rubicon til next season.

MickB

Top
#116376 - 22/09/03 10:44 PM Re: RUBICON! Mid Oct.
Huey Offline
Member

Registered: 27/03/01
Posts: 1812
Loc: Hayward, CA
Quote:
Originally posted by MickB:


...Marty, have you been into the Rubicon via Wentworth Springs trail? If I understand correctly, without looking at the map, this is one of the entrances to the Rubicon...

MickB
Hey Mick, we will be going to the Wentworth Springs area this weekend as part of the Xterra Championships trip (well be doing Baker Pass Loop). BTW, Wentworth Springs will be the exit we take for out Rubicon trip, we will enter near Loon Lake.
_________________________
-Huey
NCCX

Top
#116377 - 22/09/03 11:13 PM Re: RUBICON! Mid Oct.
MickB Offline
Member

Registered: 25/05/02
Posts: 35
Loc: Grass Valley, CA
I've been told that the "gatekeeper" at Loon Lake is nasty! I could see Loon Lake from where we stopped at on Wentworth springs trail last Sunday.

I'd really like to go! I can't say whether or not I'll be ready...probably not. frown

Mick

Here's your list though:

1. Marty
2. Huey (Oct. 10-13)
3. Dean (and weekend pre Oct. 26th)
4.

Top
#116378 - 23/09/03 02:29 PM Re: RUBICON! Mid Oct.
XPLORx4 Offline
Member

Registered: 23/03/01
Posts: 1906
Loc: San Jose, CA
Quote:
Originally posted by Huey:
Quote:
Originally posted by MickB:
[b]

...Marty, have you been into the Rubicon via Wentworth Springs trail? If I understand correctly, without looking at the map, this is one of the entrances to the Rubicon...

MickB
Hey Mick, we will be going to the Wentworth Springs area this weekend as part of the Xterra Championships trip (well be doing Baker Pass Loop). BTW, Wentworth Springs will be the exit we take for out Rubicon trip, we will enter near Loon Lake.[/b]
Huey, I think you got that backwards. Wentworth Springs is to the WEST/NORTHWEST, between Georgetown and Loon Lake. In other words, there are 3 "entrances" to the 'con:
1) Georgetown/Wentworth Springs
2) Loon Lake
3) Tahoe side (Hwy89) <--- but this is really the "exit"
_________________________
4x4 in uppercase is $X$!!!
1997 R50: VG33E/RE4R01A/TX10/3.7/R200A/ARB/4.636/H233B/ARB/4.636/321150R15

Top
#116379 - 23/09/03 02:51 PM Re: RUBICON! Mid Oct.
olebiker Offline
Member

Registered: 06/01/02
Posts: 580
Loc: Novato
Quote:
Originally posted by MickB:
This is awfully tempting.....yesterday I ran Wentworth Springs trail almost to Ellis Creek. As it is, I still managed to bash both corners of my rear bumper on rocks when I was trying to get through probably the most difficult obstacle.

MickB
Sorry to hear about the damage Mick. Was the rock you had trouble with this one?
IMHO Wentworth main trail is the next thing to Little Sluice and certainly more challenging (fun) than the rest of the Rubicon. However, there are a ton of bypasses on Wentworth.
_________________________
Rock on!
Move the seat up Alice, so you can push the accelerator all the way down!

Top
#116380 - 23/09/03 04:39 PM Re: RUBICON! Mid Oct.
XPLORx4 Offline
Member

Registered: 23/03/01
Posts: 1906
Loc: San Jose, CA
Quote:
Originally posted by olebiker:
Was the rock you had trouble with this one?
Link no worky.
Quote:
You do not appear to be the owner of this album.
Make sure you are logged in.
confused
_________________________
4x4 in uppercase is $X$!!!
1997 R50: VG33E/RE4R01A/TX10/3.7/R200A/ARB/4.636/H233B/ARB/4.636/321150R15

Top
#116381 - 23/09/03 05:32 PM Re: RUBICON! Mid Oct.
olebiker Offline
Member

Registered: 06/01/02
Posts: 580
Loc: Novato
Quote:
Originally posted by XPLORx4:

Link no worky.
Quote:
You do not appear to be the owner of this album.
Make sure you are logged in.
confused
Humph! Try it now? [Uh Oh !]
_________________________
Rock on!
Move the seat up Alice, so you can push the accelerator all the way down!

Top
#116382 - 23/09/03 06:11 PM Re: RUBICON! Mid Oct.
XPLORx4 Offline
Member

Registered: 23/03/01
Posts: 1906
Loc: San Jose, CA
Quote:
Originally posted by olebiker:
Quote:
Originally posted by XPLORx4:

Link no worky.
Quote:
You do not appear to be the owner of this album.
Make sure you are logged in.
confused
Humph! Try it now? [Uh Oh !]
That worked! Wow, that's a big rock! eek
_________________________
4x4 in uppercase is $X$!!!
1997 R50: VG33E/RE4R01A/TX10/3.7/R200A/ARB/4.636/H233B/ARB/4.636/321150R15

Top
#116383 - 24/09/03 11:17 PM Re: RUBICON! Mid Oct.
MickB Offline
Member

Registered: 25/05/02
Posts: 35
Loc: Grass Valley, CA
Nope...I got through that one easy enough (I'll have pics of that one when I get my film developed & on disk) I did watch a jeep struggle on it, on our way out. One of the few obstacles where the longer wheelbase of my Pathfinder was an advantage.

The one I had problems with was about 30 yards past the one pictured. Imagine the one pictured about 2 ft taller with another huge boulder in the middle of the trail, also with a few large (but smaller) boulders on the right. I tried the right side, but the rock in the middle was too big and my passenger side rear tire got in a deep rut between 2 rocks....with both of my rock sliderz on rocks and both front tires in the air! eek I wasn't going any further. I actually damaged my rear bumper trying to back out of that one...then finally got back to the bypass, which was no cake walk itself! It was awesome! I could run it again with less trouble, just takes finding the right line. The Calmini steering held up fine, but I waisted an upper control arm bushing. The front part of the bushing disintegrated.

I'll hopefully have the pics by mid next week; I have 7 more pictures to take on that roll.

We were actually close enough to Loon Lake to take that exit, but the idea of running the Gatekeeper that late in the day wasn't too appealing to me.

As far as the damage went, the worst was the rear bumper end caps.....no big deal, since one was already smashed from Strawberry Creek. I need a steel bumper!

MickB

Top
#116384 - 27/09/03 10:59 PM Re: RUBICON! Mid Oct.
MickB Offline
Member

Registered: 25/05/02
Posts: 35
Loc: Grass Valley, CA
Here's some pics from Wentworth Springs:




This is where I got hung up....notice the large boulder left and center trail! You can't see it, but there was a large boulder (under cut on the front) on the right of the trail too....not an option!



Wish I was ready to go with you guys on your Rubicon run.....you'll have a blast I'm sure!!!!!

MickB

Top
Page 1 of 2 1 2 >


Moderator:  Huey, slamson00 

shrockworks xterraparts
XOC Decal