0 registered (),
131
Guests and
3
Spiders online. |
Key:
Admin,
Global Mod,
Mod
|
|
|
#275022 - 07/09/03 10:40 PM
2000 alloy wheel recall
|
Member
Registered: 22/06/02
Posts: 102
Loc: Central PA
|
I did a few searches and did not see any posts about this so here is the info. Sorry for the captital text but that is they way they entered the report. NHTSA recall search page. Make / Models : Model/Build Years: NISSAN / XTERRA 2000 NHTSA CAMPAIGN ID Number : 03V307000 Recall Date : AUG 15, 2003 Component: WHEELS Potential Number Of Units Affected : 31700 Summary: 2000 NISSAN XTERRA VEHICLES MANUFACTURED BETWEEN OCTOBER 15, 1999, AND FEBRUARY 29, 2000. THE ALLOY WHEELS USED ON THESE VEHICLES MAY NOT HAVE BEEN PROPERLY MANUFACTURED AND COULD DEVELOP CRACKS IN THE WHEEL SPOKES. Consequence: IF A SUFFICIENT NUMBER OF SPOKE CRACKS DEVELOP, THE WHEEL COULD FAIL AND SEPARATE FROM THE MOUNTING HUB, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT PRIOR WARNING. Remedy: NISSAN WILL NOTIFY ITS CUSTOMERS AND REPLACE THE FOUR ALLOY WHEELS WITH XTERRA SE MODEL BRIGHT ALLOY WHEELS FREE OF CHARGE. THE SPARE TIRE STEEL WHEEL IS NOT AFFECTED. OWNER NOTIFICATION BEGAN ON SEPTEMBER 15, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NISSAN AT 1-800-647-7261. Notes: ALSO, CUSTOMERS CAN CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATIONS AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
_________________________
--------------------- The ultimate result of shielding men from the effects of folly is to fill the world with fools.
Herbert Spencer, 1820-1903
|
Top
|
|
|
|
#275023 - 08/09/03 12:17 AM
Re: 2000 alloy wheel recall
|
Member
Registered: 27/02/01
Posts: 5206
Loc: Seattle, WA
|
Glad they finally recalled the wheels. My truck was built a month too early so I guess I can't get my beaten to death SE wheels replaced (none of my originals have cracks). I do have one cracked one though, but it's not off my truck and it's the XE (non machined) version. I still may try and get it replaced, but I don't want it replaced with the machined wheel.
_________________________
ChuckH "Every morning when I wake up I know it's not going to get any better 'til I go back to sleep again!" Al Bundy
|
Top
|
|
|
|
#275025 - 08/09/03 06:32 AM
Re: 2000 alloy wheel recall
|
Member
Registered: 05/05/02
Posts: 142
Loc: el paso, texas and connecticut
|
wow that's awesome.. so.. do they look the same? can someone post a pic of the SE model bright alloys?
thanx!
_________________________
Just keep swimming.. Just keep swimming..
|
Top
|
|
|
|
#275026 - 08/09/03 06:57 AM
Re: 2000 alloy wheel recall
|
Anonymous
Unregistered
|
Thanks for posting this topic. I never would have known about it otherwise. Good work!
|
Top
|
|
|
|
#275030 - 08/09/03 04:48 PM
Re: 2000 alloy wheel recall
|
Member
Registered: 05/05/02
Posts: 142
Loc: el paso, texas and connecticut
|
xorand, thats exactly how i feel about them. maybe we can pay the difference to get the charcoal ones or something?
_________________________
Just keep swimming.. Just keep swimming..
|
Top
|
|
|
|
#275031 - 08/09/03 04:52 PM
Re: 2000 alloy wheel recall
|
Member
Registered: 16/08/00
Posts: 1673
Loc: Andes, NY
|
Correct me if I'm wrong but as I read it, this recall applies to all Xterras (XE or SE) made within those build dates, all of which came with the 15" non-cross-type wheels. The SE wheels look just like the XEs but were more polished. As I read it, everyone affected will get the SE polished wheels as replacements. My build date was 3/00 (got to check again).
_________________________
Boldly going nowhere.
|
Top
|
|
|
|
#275032 - 08/09/03 04:54 PM
Re: 2000 alloy wheel recall
|
Member
Registered: 27/02/01
Posts: 5206
Loc: Seattle, WA
|
Originally posted by xoc: What about all those people with cracked XE wheels ? I've seen more pictures of those here than anything else. If I'm understanding it correctly they are only saying that the replacement wheels are the SE styled ones. Could it be that the XE version is no longer available so everyone gets the machined ones instead regardless of which they had to begin with? I'm guessing that's the case since Nissan started only offering the machined wheel after 2000. Even if that's the case though it's unfortunate...the XE version is 10X better looking than the machined wheel. Oh yeah, the one of mine that is cracked is the XE style, but I bought those wheels from someone else so I don't know if they'll replace them anyway and the last thing I want are more of the machined wheels. In an effort to clear up some confusion for some folks, these are the style wheels being recalled. The first picture is the non machined XE version and the second picture is the machined version with the dark inserts. The second machined type is the replacement regardless of which you currently have if I'm understanding this correctly. Sorry; I'm at work and those are the best I can find right now.
_________________________
ChuckH "Every morning when I wake up I know it's not going to get any better 'til I go back to sleep again!" Al Bundy
|
Top
|
|
|
|
#275033 - 08/09/03 04:55 PM
Re: 2000 alloy wheel recall
|
Member
Registered: 11/01/02
Posts: 268
Loc: Houston TX
|
Originally posted by Xorand: Just checked the door post and my build date is 01/00, so I guess I'm eligible.
Curious what exact style wheel they are referring to (shiny SE style). If it's the four-spoke models standard on various '02 and '03 models, I don't like those near as much as my '00's. I agree, maybe we can haggle for some Frontier rims...
_________________________
When money talks, nobody pays any attention to the grammar.
|
Top
|
|
|
|
#275034 - 08/09/03 06:35 PM
Re: 2000 alloy wheel recall
|
Member
Registered: 27/02/01
Posts: 5206
Loc: Seattle, WA
|
Originally posted by Xorand: Originally posted by ChuckH: [b]The second machined type is the replacement regardless of which you currently have if I'm understanding this correctly.
If that's the case, I could live with those wheels. Shiny or not, I like the style of the early wheels better than the rounded four spokers.[/b]I here ya there...the 4 spoke wheels are fugly for sure. Good news is you don't have to worry about that because those are also 16" wheels and I think we can rest assured that Nissan isn't buying new tires for everyone too.
_________________________
ChuckH "Every morning when I wake up I know it's not going to get any better 'til I go back to sleep again!" Al Bundy
|
Top
|
|
|
|
#275035 - 08/09/03 07:59 PM
Re: 2000 alloy wheel recall
|
Member
Registered: 16/08/00
Posts: 467
Loc: Huntsville, AL
|
Of course let's not forget that this is why Nissan is recalling these wheels: The over view of the crack. and...upclose (sorry it's a little blurry). Oh, and I find it interesting that the notification of owners began Sept. 15th, 2003. That's still a week away.
|
Top
|
|
|
|
#275037 - 06/10/03 05:57 PM
Re: 2000 alloy wheel recall
|
Member
Registered: 20/08/00
Posts: 598
Loc: Lakeland, FL
|
got mine today. so exactly what wheel are we getting? is it the 4 spoke? and what if i need to buy one more for the spare. I do a 5 tire rotation.
_________________________
Real Men Wear Kilts Member number #112 Aug. 20, 2000
|
Top
|
|
|
|
#275038 - 07/10/03 08:19 AM
Re: 2000 alloy wheel recall
|
Member
Registered: 16/08/00
Posts: 467
Loc: Huntsville, AL
|
I had mine done a few weeks ago and the new wheels look just like the old ones (except new of course).
The recall does not apply to the spare since the spare wheel is steel. If your spare is alloy and made in the time frame in question you'll need to discuss that with your dealer I guess. There is a provision in the recall that allows for one to be reimbursed if they had already purchased new wheels to fix the cracking problems.
|
Top
|
|
|
|
#275039 - 07/10/03 08:39 AM
Re: 2000 alloy wheel recall
|
Member
Registered: 16/08/00
Posts: 1818
Loc: Santa Clara, CA
|
Benny, did you receive notification first or did you just go to the dealership and talk to them about it?
_________________________
-Jeff "May the Force be with you...for me to poop on." "Russell! Somebody gonna get a hurt real badddd."
|
Top
|
|
|
|
#275040 - 07/10/03 09:22 AM
Re: 2000 alloy wheel recall
|
Member
Registered: 21/04/02
Posts: 139
Loc: Annapolis, MD
|
I called Nissan and they told me that my X was made on March 2, 2000, which is only 2 days past the recall. They told me I didn't have to have them replaced but I'm kinda worried about it since it was only 2 days. What if it was made in February then just sat there for a few days before being completed?
|
Top
|
|
|
|
#275041 - 07/10/03 09:33 AM
Re: 2000 alloy wheel recall
|
Member
Registered: 31/12/02
Posts: 370
Loc: Pine Bush NY
|
WHat if you own the wheels but don't own the 2000 SE?
_________________________
I pump CAD
|
Top
|
|
|
|
#275042 - 07/10/03 10:00 AM
Re: 2000 alloy wheel recall
|
Member
Registered: 21/01/02
Posts: 93
Loc: Thousand Oaks.Ca
|
Originally posted by BennyLen:
I had mine done a few weeks ago and the new wheels look just like the old ones (except new of course).
The recall does not apply to the spare since the spare wheel is steel. If your spare is alloy and made in the time frame in question you'll need to discuss that with your dealer I guess. There is a provision in the recall that allows for one to be reimbursed if they had already purchased new wheels to fix the cracking problems. Can you post a pic? And does anyone know if you can pay xtra or difference for any other type of wheel that fits or nissan offers like the supercharger rims???
_________________________
31x10.5x15 BFG A/T KO's K&N Intake Air Filter Gibson Exhaust System Bilstein Shocks Thor Mod Billet Grill Yakima Big Powder Hound X-Net Raingler Levoc A/T Shifter NGK Iridium Plugs-BKR5EIX11
|
Top
|
|
|
|
#275043 - 07/10/03 10:16 AM
Re: 2000 alloy wheel recall
|
Member
Registered: 20/04/02
Posts: 502
Loc: Ridgefield Park, NJ
|
Originally posted by stosh: WHat if you own the wheels but don't own the 2000 SE? I'm in the same boat. And the guy I bought them off of doesnt even own his X anymore. The dealer said that there wasn't much they could do since the wheels aren't original equipment on my X. Haven't tried contacting Nissan yet
_________________________
It's easy to grin when your ship comes in and you've got the stock market beat. But the man worthwhile is the man who can smile when his shorts are too tight in the seat.
|
Top
|
|
|
|
#275044 - 07/10/03 10:23 AM
Re: 2000 alloy wheel recall
|
Member
Registered: 31/12/02
Posts: 370
Loc: Pine Bush NY
|
Originally posted by dano: Originally posted by stosh: [b]WHat if you own the wheels but don't own the 2000 SE? I'm in the same boat. And the guy I bought them off of doesnt even own his X anymore. The dealer said that there wasn't much they could do since the wheels aren't original equipment on my X.
Haven't tried contacting Nissan yet [/b]Ok cool well if you find anything out please let me know!!!
_________________________
I pump CAD
|
Top
|
|
|
|
#275045 - 07/10/03 06:11 PM
Re: 2000 alloy wheel recall
|
Member
Registered: 16/08/00
Posts: 1673
Loc: Andes, NY
|
Originally posted by stosh: WHat if you own the wheels but don't own the 2000 SE? Yeah, I bought a second set of XE alloys off ebay during the winter of '00/'01 and have no idea if they fall within the recall period. I guess I'll just have to keep a very close eye on them.
_________________________
Boldly going nowhere.
|
Top
|
|
|
|
#275046 - 08/10/03 07:01 AM
Re: 2000 alloy wheel recall
|
Member
Registered: 16/08/00
Posts: 467
Loc: Huntsville, AL
|
Benny, did you receive notification first or did you just go to the dealership and talk to them about it? I have yet to recieve a notification. I called the dealership when I first heard about this and they didn't know anything. I waited a week and checked back. By then they had the recall in their database. If you provide them your VIN over the phone they can tell you if you're affected. If so, they should set up an appointment for when you can come in. It took about an hour and half to change out all four wheels for me.
|
Top
|
|
|
|
|