Looks kinda goofy with those "little" 31X10.5-15 tires on it...gotta get some 33X12.5-15 maybe tax time

Thought about marketing this at all? Might have a few buyers here.

Just the salesman in me talking...

It actually does not look goofy at all. But it'll be bad ass when you get the 33's.

What does make it look goofy though are those gay-ass splash guards.

Okay, I I have the calmini shackles and the blocks ordered. This gives me some time to find the bolts. I went to check at Home Depot tonight and the only items that they had were the 10mm and 12mm washers. I drove to Ace that is closest(not so close) and it is a new store that has not opened. I appreciate what others have posted on this thread, it almost makes it seem too easy.

Yep...thought about it but the bolts are too hard to find. There is a ton of information and resources on this XOC site, which made it possible for me and alot of other people to mod, and mod very cheaply.
Thanks for all the help, people

and yes the flaps gotta go

MMNIAC, sent a PM to you.

I finally got the pucks to complete my "Assemble Your Own 2"BL kit." Hopefully I can do the install this weekend:

Installed!

Got home from work and just decided to go for it. Took me just under 6 hours by myself. I still need to relocate the rear bumper though.

Wish I had got the 33's now

Now if I get a decent tax return I can put in for some 2" BL Shrock sliders. JOY!

6 hours alone is excellent!

You were flying.



I typically need about 4 hrs...and that's with freinds, beer and pizza.

Way to go

The site for the body pucks says SOLD OUT, do you have to call or are they really sold out?

I left my rear bumper about 1/2 inch lower than stock...it just seemed to fit better there.
Plus now I can get my fingers between the rear bumper and the hatch

That's what happened when I tried to order them. I called them and they fixed it on the website. Was able to order online then. Call em.

I ordered my body pucks on 12/30 and have not received them yet. I called yesterday to check on them and the lady could not get in touch with the warehouse to get tracking info. I asked about them being sold out and she said that my order went through before they might have sold out of them. I hope to get them soon. For those that ordered from them, how long did it take?

How about posting some pics for those of us who are looking into doing the same?

Before:


After:


Even got some white stuff!

Skaggs,bro, it's looking good.

Didn't you just get new tires not too long ago? Maybe you can swap someone out for some 33s.

When are you going to get some UCAs for that thing? You've done everything else...

I totally wish I had gone for the 33's now. When I was making the decision on the tires, I had ruled out the body lift so I stuck with 32's. I've had them rotated once so that means about 7500 miles? I hate to lose money on them just to get the 33's. They will do ok for now but the next set will be 33's and I might even go for some steelies.

I would love to get the UCA's since I've had in my garage for months the SLR AAL's and Diff drop kit. I've been trying to budget for the UCA's but I really should get some Shrock sliders first. But after that, it's on! Maybe you could help me pay for them. Whata you say!?

About the pucks, it did take a while since they forgot about my order over the holidays. I had to call when after a week and a half and no package. When they actually sent it, only took 3 days. Seems like when you place your order online, it gets overlooked. Call them.

For anyone debating the BL, next to and in conjunction with the PML, it is awsome. Good inexpensive way to get some lift and make room for bigger tires.

LOL. Dude, I'm saving up for a pup and a house. Both of which you've got me beat by.

Speaking of which, you've got to get the pooch in the new profile pic.

Received the body pucks today via Fed Ex, they shipped directly from Preformance Accessories, not SportzTrailers.

When I went to Ace, they did not have the 7/16" Nylock nuts grade 8, but had two others that I got. 7/16" grade 8 nut and 7/16" locking nut(not grade 8). Would I be able to use either, or what the guy at Ace suggested was to double up and use both. Any ideas?

The only bolts that I am lacking is the M10 x 1.25 x 160mm bolts. I tried one bolt place in town and no luck.

Cool. Find all the bolts yet?

Skaggs396, I have tried the 4 bolt co. in town to find the M10 x 1.25 x 160mm bolt. Was the place you got yours a local or national chain? I asked them if it could be special ordered and they told me no. Any ideas?

I think it's just a local bolt company. They had several in stock. Cost me $26.88 including tax for 2. I'm surprised you can't find the M10's. The M12's are the tough ones to get.

It's called J&E Supply and Fastener Co. If you can't find them elsewhere call them at 405-670-1234. Maybe they can ship some to you. But call around there locally where you are and I imagine you'll find them

xkahn, find those M10's yet?

Nope, I have not had time to check anymore this week. Planning to do it tomorrow. Now I am just lacking the 10mm bolts, both sizes.